Skirting
 

Fold-n-Seal Skirting

Argonics Fold-n-Seal Skirting
The Fold-n-Seal is a two-part skirt featuring a 3/4” primary seal combined with
a flexible secondary seal to keep material and dust contained on the conveyor
belt. Made with Argonics’ high-performance Kryptane® polyurethane, Fold-n-
Seal will outlast rubber dual seals an average of five-to-one. Fold-n-Seal fits into
most other clamping systems on the market today, making it a snap to replace
your old skirts. The Fold-n-Seal is also available in Front Line™ flame retardant
urethane which is MSHA approved for underground mine use.
• Solid galvanized 12ga steel mounting rail
• Easy access hinge design reduces maintenance time
• Accepts skirting thicknesses from 3/8” to 1”
• Quick weld-in or bolt-on installationWedge-loc Skirting

Wedge-loc Skirting

Argonics Wedge-loc Skirting
The Wedge-Loc skirting system is designed to install quickly by either welding
or bolting into place. Adjustment is just as easy with the patented “wedges.” The
single blow of a hammer locks the polyurethane skirting into place. Wedge-Loc
comes standard with Argonics’ 1/2” x 5” beveled green polyurethane skirting,
providing you with the very best possible long term protection in the industry.
• Solid galvanized 12ga steel mounting rail
• Easy access hinge design reduces maintenance time
• Accepts skirting thicknesses from 3/8” to 1”
• Quick weld-in or bolt-on installation

Snap-Loc Dust Seal

Argonics Snap-Loc Dust Seal
The Snap-Loc Dust Seal utilizes Argonics’ exclusive high performance polyure-
thane, which stands up to the harshest environments. With its inherent “memory-
set” properties, the dust seal applies downward pressure onto your belt’s surface
to create a tight fines seal. Snap-Loc will continue to self-adjust throughout the
life of the dust seal, so there is no need for manual adjustment.
• High Performance Polyurethane
• Available in continuous lengths up to 60’
• Quick weld or bolt-in installation
• MSHA accepted flame retardant formulas available
• Tear resistant

 

 

Flame Retardant Sheets

Argonics Flame Retardant Sheets
Argonics sheet materials are available in standard 4’x8’, 4’x10’, 5’x8’ and 5’x10’
sizes, and from 1/8” to 1” thick. Sheets are available in plain, fabric backed, ex-
panded metal and weldable configurations. Larger sizes and custom geometric
shapes are available upon request.
• Custom part development available
• Resistant to corrosive applications
• Easy to handle and lightweight

Argonics Roll Skirting

The same great polyurethane sheets you use are available in rolls, too!
Argonics’ rolls are available in 4- and 5-foot widths, in lengths of 25, 50, 75 and
100 feet, and from 3/16” to 1” thick. Rolls are available in plain or fabric backed.
• Resistant to corrosive applications

 

 

 

AccuFlo Skirting

Argoinics AccuFlo replacement skirting utilizes Argonics’ exclusive high performance
polyurethane, which stands up to the harshest environments. Argonics’ urethane
replacement skirting also reduces drag on your conveyor system up to 60
percent less than rubber seals, providing you with cost savings as well as adding
life to all your major components.
• Direct replacement
• High Performance Polyurethane
• Available in continuous lengths up to 50’
• MSHA accepted flame retardant formulas available
• Tear resistant

 
 
 

Tons Per Hour Inc. 700 Doe Run Lane Newcastle CA 95658 Ph. 916 663 3800 Fx. 916 663 3899

Home Belt Press Chemicals Cyclones Dewatering Screens Filter Press Other Products Skirting Wheel Wash Contact